Volvo Penta Workshop Manual Model# 2001 2002 2003(T)
Are set by Volvo Penta and must never be. changed since. this will affect the
engine output. 9. Remove the control rod . Start by removing the plug at …
This workshop manual contains repair instructions for the 2001,2002 and 2003 engines. The instructions concerning overhauling describe the most suitable working method using the special tools listed under the heading “Special tools”. Both the engine designation and its serial number must be clearly stated in all correspondence concerning the engine and when ordering parts. We reserve the right to carryout design modifications and, for this reason, the contents of this manual cannot be regarded as binding….
DISASSEMBLY Drain off the cooling water and the lubricating oil from the on engine cradle p/n 9992520 and fixturep/n 884837 . If the engine is fresh water cooled, see page 21. 1. Remove the alternator, the tensioner bracket and the starter motor. Remove the connections from the electrical distribution box from the engine and remove the box and the wire harness. 2. Remove the return fuel line, the fuel pressure lines and the inlet air silencer. Install protection caps on the fuel injection pumps and injectors . Remove the screw holding the lever of the decompression device (1) and pullout the lever. Remove the valve cover….
Download Volvo Penta Workshop Manual Model# 2001 2002 2003(T).Pdf
I have 2004 volvo penta 4.3 gl Iwould like to know the procedure for setting the ignition timing