Solar Electric Meter Installation and User Manual © 2007 General Electric Company. … • Turn off solar system breaker in house main panel • Turn OFF the house main service … GE Energy© 2007 General Electric Company. All rights reserved . Solar Electric System Meter Installation & User Manual GE Energy 231 Lake Drive Newark, DE 19702 USA Phone: +1 302-451-7500 Fax: +1 302-451-7501 Solar Electric Meter Installation and User Manual© 2007 General Electric Company. All rights reserved . Version 1.0 Page 2 of 20…

Solar Electric Meter Installation and User Manual © 2007 General Electric Company. All rights reserved . Version 1.0 Page 2 of 20 Congratulations on owning a GE Brilliance™ solar electric system and thank you for making a conscious decision to save our environment through the use of renewable energy! Along with ease of installation and services, our industry-leading systems provide a safe and reliable source of renewable power. These prepackaged systems are designed to supply years of maintenance-free operation. This solar energy performance meter complements your new solar system by enabling you to track the performance of your solar system through real-time feedback and long term comparisons of your home energy consumption and PV production. The unit will compare the house consumption and Photovoltaic (PV) production for real-time power measurements in 20-second intervals, show graphs and maximums of daily/weekly/monthly energy generated and consumed and also display total energy used since the system’s installation. This is a habit-changing device that we hope you will enjoy. This manual contains installation and setup steps, as well as general use and troubleshooting information. Please keep it on file for future reference. Most importantly, due to the need to access the utility feed of your main panel, a certified electrician is required to install the transducer portion of the kit. This manual contains important instructions that should be followed during installation and maintenance of the GE Energy Power System Meter. This manual must be read and understood prior to installing the system…. SETTING UP THE DISPLAY To enter the setup menu press the button for more than 5 seconds. Once in setup mode you will scroll through 8 separate modes. To scroll to the next setting use: To adjust a setting use: To exit the setup, either press for 5 seconds, or do not press any buttons for 10 seconds. Setup Code Mode Description S001 Time Allows you to adjust the time. S002 Date Allows you to adjust the date. S003 Weekday (1-7 for Sunday-Saturday) Selects the weekday. The on the display screen identifies the current day selected. S004 Transducer ID Allows you to select the transducer unit that communicates with your display. The ID is located on the transducer label. The ID must be correct in order to receive a signal. S005 RF Signal Display Displays the strength of the RF signal. The signal strength is updated every 2-3 seconds. Also, the screen will exit setup completely if no button is pressed after 10 seconds. In the RF signal screen, you can press the display’s “adjust” button to refresh the countdown timer in order to view the RF signal for more than 10 seconds. NOTE: The signal will be displayed only after the transducer ID is set correctly. S006 PV + House/ PV only Toggle Switches the display between PV only and PV + house consumption. In some cases the house consumption may not be used (refer to Installation STEP 6 for specific details). S007 Esleep Toggle (On/OFF) This feature extends battery life by more than 2x and is an option for those who do not expect to be around during the day. Pressing any button when the display is in the sleep mode will wake it up for 15 minutes.

Download Solar Electric System Meter Installation & User Manual.Pdf