IMPORTANT, READ THIS FIRST: Study these instructions completely before proceeding.
Engine and/or turbocharger damage may occur if any component within these instructions
is improperly installed. Turbonetics, Inc. or any of its distributors cannot be held responsible fordamages as a result of negligent or improper installation. This complete turbocharger system can be installed using common tools and automotive procedures, but installer must have a thorough knowledge of automotive engine operation and feel comfortable working on the vehicle. If indoubt, consult a knowledgeable turbo installer or Turbonetics tech support specialist with anyquestions.

Although this turbo system has been designed to use existing emissions controls (including
catalytic converter), check local laws regarding aftermarket modification to emission controlled vehicles. Remove the turbocharger kit from its carton and inspect for any obvious physical damage. All kit components are thoroughly inspected and carefully packaged prior to shipmentfrom the factory. If any shipping damage is evident, contact your supplier and request that theyprocess a claim with the shipper involved. Be sure to review the Turbo System Parts List to verifythat you have all necessary kit components to proceed. If any components in the parts list are missing, contact Turbonetics, Inc. Customer Service department.

Before proceeding, it is recommended to have the following items:

•Honda / Acura service / repair manual
•A large table / bench nearby
•Standard selection of automotive tools
•Plenty of adjacent available workspace
•The ability to lift the vehicle (at least a foot or two off the ground)
•Replacement oil pan gasket or RTV sealant, oil filter and engine coolant
•NPT thread sealant tape…

Download Turbo Systems Installation Instructions Acura Integra / Honda Civic.Pdf:

Download file